|
Up
Model G 
(You are here.)
  Need
to
find your
bearings?
Try
these
navigation aids:
If
this is your first
visit, please stop by:
Something
to share?
Please:
|
|
Available in Française, Español, Português, Deutsch, Россию,
中文,
日本, and others.
 n
1913, Wright Co. chief engineer, Grover Loening, designed this seaplane
under the supervision of Orville. The Model G had a 38-foot span; 430
sq-foot area; 6-foot chord; 5-foot separation; 28 feet length; and weighed
1,200-1,300 pounds. With its 18-foot boat-like hull, it was the first
product of the Wright Company to have an enclosed cockpit. Early versions
of the
twin-propeller pusher had the motor in the rear and the pilot sat in front
of it. Later the engine was moved in front of the pilot, who sat behind it
and beneath
the wings. Powered by the 6-60 motor, the aircraft flew up to 60 mph.
Loening introduced several "non-Wright" features on later
versions of this
aircraft, such as dihedral wings, a non-flexing two-piece elevator mounted
on top of the rudder, and an optional wheel to control the pitch and roll.
References:
- McFarland, Marvin W. (ed) The papers of Wilbur and Orville Wright.
McGraw-Hill Book Co., New York, 1953, p 1183. Pictured in plate 218.
- Loening, Grover C., "The New Wright Aeroboat Type
"G"." Aeronautics, Vol 14, No 6, Jun 15, 1914, pp
170-171.
[Submitted by Joe W. McDaniel] |
 |
|
